ANTEL RADIANT 950MX

                NAM Type:  EEPROM
            Manufacturer:  Sun Moon Star
              Programmer:  Handset
          ESN Prefix DEC:  178
                     HEX:  B2
 ESN, S/N Match Required:  Yes
      Available Channels:  832
    Programming Sequence:  Power On
                           Enter programming mode: FCN + FCN + * + 950626 + *
                           Software version will be displayed
                           Press (up arrow) key to advance
                           Select NAM 1, 2, 3 oe 4, within 5 seconds
                           Use (up arrow) and (down arrow) keys to step
                            through parameters
                           Press # after entering each parameter to store info.
                           Once all information has been programmed, press
                            FCN + FCN to exit

                       # digits
        System ID Format:  5     XXXXX + #
           Station Class:  SCM 8 (should be displayed)
           Mobile Number:  10    XXX-XXX-XXXX + #
  Initial Paging Channel:  3     333 or 334 + #
   Access Overload Class:  2     XX + #
         Group ID Format:  2     XX + #
             Lock Code A:  3     XXX + #
             Lock Code B:  3     XXX + #
        Local Use Option:  1     1 + #
              MIN Option:  1     1 + #
        Preferred System:  1     0(B) or 1 (A) + #
   End-to-End Signalling:  1     1 + #
        Repertory Option:  1     1 + #
       Horn Alert Option:  1     1(Enable) or 0(Disable) + #
        Handsfree Option:  1     1(Enable) or 0(Disable) + #
        Full Lock Option:  1     1(Enable) or 0(Disable) + #
             Lock Option:  1     1(Enable) or 0(Disable) + #
     Partial Lock Option:  1     1(Enable) or o(Disable) + #

              Horn Alert:  FCN + 4 + 1
         New Unlock Code:  NAM
           System Select:  FCN + 5 + X
                            X=1  AB Pref A
                            X=2  BA Pref B
                            X=3  A only
                            X=4  B only
                            X=5  Home

Press CLR to exit.