-------------------------------------------------------------------------------
                            CLARION 1100 CT
-------------------------------------------------------------------------------
                NAM Type:  Tri-State
            Manufacturer:  Clarion
              Programmer:  Motorola 1801 -- Celnam, Curtis or Bytek
          ESN Prefix DEC:  140
                     HEX:  8C
 ESN, S/N Match Required:  No
    Programmable Handset:  No
      Available Channels:  832

     Phone Number Format:  XXX-XXX-XXXX
        Lock Code Format:  XXX

              MIN Option:  Enabled
        Repertory Option:  Enabled
        Handsfree Option:  Enabled or Disabled
        Local Use Option:  Enabled
   End-to-End Signalling:  Enabled
       Horn Alert Option:  Enabled

        System ID Format:  XXXXX
        Preferred System:  A or B
   Access Overload Class:  XX
         Group ID Format:  XX

  Initial Paging Channel:  333 or 334
           Station Class:  08

              Horn Alert:  L/H + HORN/# (simultaneously)
         New Unlock Code:  NAM
           System Select:  FUNC + 2 + 0 + SRCH + SRCH +
                            SRCH (to scroll)
                           (one of the following will appear)
                            Standard  (AB or BA)
                            Invert  (BA or AB)
                            Home
                            Roam  (A only or B only)

Press STO to enter selection

-------------------------------------------------------------------------------
                             CLARION 3000 CT
-------------------------------------------------------------------------------
                NAM Type:  EEPROM
            Manufacturer:  Clarion
              Programmer:  Handset
          ESN Prefix DEC:  166
                     HEX:  A6
 ESN, S/N Match Required:  Yes
      Available Channels:  832

    Programming Sequence:  Power On (Err 3 may be displayed if
                            phone has not been programmed)
                           Press CLR + * + * + 123123 + # + # (within 10
                            seconds)
                           0 will be displayed
                           Select NAM 1 thru 3 by entering 1, 2 or 3
                           Press RCL + step number + enter new information
                            + STO (for each step)
                           (To enter unlock code 123; RCL + ) + 123 + STO)
                           Power OFF to exit program mode

             Unlock Code:  3or4  XXX or XXXX + STO
        System ID Format:  5     XXXXX + STO
        Local Use Option:  1     1 + STO
              MIN Option:  1     1 + STO
           Mobile Number:  10    XXX-XXX-XXXX + STO
           Station Class:  2     08 + STO
  Initial Paging Channel:  3     333 or 334 + STO
   Access Overload Class:  2     XX + STO
        Preferred System:  1     1(A) or 0(B) + STO
         Group Id Format:  2     XX + STO

Power OFF to exit program mode.

-------------------------------------------------------------------------------
                        CLARION 5100CT and 5200CT
-------------------------------------------------------------------------------
                NAM Type:  EEPROM
            Manufacturer:  Clarion
              Programmer:  Keypad
          ESN Prefix DEC:  166
                     HEX:  A6
 ESN, S/N Match Required:  Yes
    Stamped Model Number:  None (handset is labeled 5100CT or 5200CT)
      Available Channels:  832

    Programming Sequence:  Power On (Err 3 may be displayed if
                            phone has not been programmed)
                           Press CLR + * + * + 123123 + # + # (within 10
                            seconds)
                           0 will be displayed
                           Select NAM 1 thru 3 by entering 1, 2 or 3
                           Press RCL + step number + enter new information
                            + STO (for each step)
                           (to enter station class; RCL + 5 + 08 + STO)
                           Power OFF to exit program mode

             Unlock Code:  3or4  XXX or XXXX + STO
        System ID Format:  5     XXXXX + STO
        Local Use Option:  1     1 + STO
              MIN Option:  1     1 + STO
           Mobile Number:  10    XXX-XXX-XXXX + STO
           Station Class:  2     08 + STO
  Initial Paging Channel:  3     333 or 334 + STO
   Access Overload Class:  2     XX + STO
        Preferred System:  1     1(A) or 0(B) + STO
         Group ID Format:  2     XX + STO

Power OFF to exit program mode.

             Display ESN:  FCN + 6
              Horn Alert:  FCN + 8 + "+ or -"
         New Unlock Code:  NAM
           System Select:  FCN + 4 + "+ or -" (to scroll choices) + STO