CM TELECOM AR3800

NOTES:  This is a dual NAM unit.
        The ESN prefix is 153 decimal and 99 hex.
        This unit was only imported for a short time and is no longer
        supported in the USA.
        Several different software versions have been available and not
        every phone will follow these steps... Good Luck!
        Leave NAM 2 data at factory default If NAM 2 is not used.

1.  Turn on power.

2.  Lock phone by pressing FUNC 1, then 1 repeatedly until the phone
    displays F-LOCK, press SND.

3.  Enter * 5 9 6 5, display will show "CONF 3800", if not try entering
    * 4 0 1 8 which is the master reset code.

4.  Volume up and down keys step through the programing data.  You may
    also directly access any step by pressing RCL NN, where NN is the
    step number.  Some single digit options toggle by pressing STO (?).

5.  Press SND to store each step.

6.  Press END to complete programing and exit at any time.

PROGRAMING DATA:

STEP#    #OF DIGITS/RANGE    DISPLAY        DESCRIPTION

01       10 DIGITS           MINA           NAM 1 AREA CODE & PHONE NUMBER
02       00000 - 99999       SIDA           NAM 1 SYSTEM ID
03       0333 OR 0334        IPCHA          NAM 1 INITIAL PAGING CHANNEL
04       2 DIGITS            ACOLCA         NAM 1 ACCESS OVERLOAD CLASS
05       2 DIGITS            GIMA           NAM 1 GROUP ID (10 IN USA)
06       0 OR 1              L CTLA         NAM 1 LOCAL USE MARK
07       0 - 4               MINA           NAM 1 PREFERRED SYSTEM
                                            0 = Prefer A
                                            1 = Prefer B
                                            2 = A only
                                            3 = B only
                                            4 = Home only
08       UNKNOWN (LOCK CODE?)
09       UNKNOWN
10       10 DIGITS           MINB           NAM 2 AREA CODE & PHONE NUMBER
11       00000 - 99999       SIDAB          NAM 2 SYSTEM ID
12       0333 OR 0334        IPCHB          NAM 2 INITIAL PAGING CHANNEL
13       2 DIGITS            AOLCB          NAM 2 ACCESS OVERLOAD CLASS
14       2 DIGITS            GIMB           NAM 2 GROUP ID (10 IN USA)
15       0 OR 1              L CTLB         NAM 2 LOCAL USE MARK
16       0 - 4               MINB           NAM 2 PREFERRED SYSTEM
                                            0 = Prefer A
                                            1 = Prefer B
                                            2 = A only
                                            3 = B only
                                            4 = Home only
17       0 ONLY              E ADDR         LEAVE AT 0
18       0 OR 1              PWR SAVE       AUTO POWER OFF OPTION
19       00000 - 99999       ISID           INHIBIT SYSTEM ID
20       4 DIGITS            PCAC           PROGRAMING PASSWORD