TUCoPS :: Phreaking Cellular - Other Manufacturers :: gte.txt

GTE Metal Series Programming


                              GTE METAL SERIES


                NAM Type:  Tri-State

            Manufacturer:  Sun Moon Star

              Programmer:  Motorola 1801 - Celnum, Bytek, Curtis

          ESN Prefix DEC:  178

                     HEX:  B2

 ESN, S/N Match Required:  Yes

    Programmable Handset:  No

      Available Channels:  832

     Phone Number Format:  XXX-XXX-XXXX

        Lock Code Format:  XXX or XXXX

              MIN Option:  Enabled

        Repertory Option:  Enabled

        Handsfree Option:  Enabled (if equipped)

        Local Use Option:  Enabled

   End-to-End Signalling:  Enabled

       Horn Alert option:  Enabled

        System ID Format:  XXXXX

        Preferred system:  A or B

   Access Overload Class:  XX

         Group ID Format:  XX

  Initial Paging Channel:  333 or 334

           Station Class:  08

    Manufacturer Options:

        Hex Address     B7           B0

            13          X 0 0 0 0 X X X

Hex Address 13 - B7  16-digit dial from memory if enabled

                      or 32-digit dial if 0 is entered.

                 B2  Program with 1 to enable special lock.

                 B1  Program with 1 to enable partial lock.

                 B0  Program with 1 to enable roam inhibit.

To disable any feature listed above, program bit with a zero.

              Horn alert:  F + 7

         New Unlock code:  NAM

           System Select:  F + 5 + X

                                 X=1  Standard (AB or BA)

                                 X=2  Alternative (BA or AB)

                                 X=3  Non Pref only

                                 X=4  Pref only

                                 X=5  Home

TUCoPS is optimized to look best in Firefox® on a widescreen monitor (1440x900 or better).
Site design & layout copyright © 1986-2024 AOH