-------------------------------------------------------------------------------
                               MEI CT2000
-------------------------------------------------------------------------------
                NAM Type:  EEPROM
            Manufacturer:  MEI
              Programmer:  Handset
          ESN Prefix DEC:  167
                     HEX:  A7
 ESN, S/N Match Required:  Yes
    Stamped Model Number:  CT 3000
      Number of Channels:  832

    Programming Sequence:  Power On
  Enter program sequence:  12358 + * + 0 + #980 + #
                           Press 1 to enter program mode
                           Select NAM 1 or 2
                           Enter information for each step then press
                            * to increment
                           Press END to write NAM information or select
                           NAM 2 and repeat progress to program 2nd

                       # of digits
               System ID:  5    XXXXX + *
               Local Use:  1    1 + *
              MIN Option:  1    1 + *
           Mobile Number:  10   XXX-XXX-XXXX + *
           Station Class:  2    08 + *
    Initial Page Channel:  3   333 or 334 + *
         Access Overload:  2    XX + *
        Preferred System:  1    0 (B) or 1 (A)
                Group ID:  2    XX + *
               Lock Code:  3    XXX + *
   End-to-End Signalling:  1    1 + *
        Repertory Option:  1    1 + *
              Horn Alert:  1    1 + *
               Handsfree:  1    1 + *
                Sec Code:  3    XXX + *

Press END to write NAM information

              Horn Alert:  FCN + 9
         New Unlock Code:  NAM
           System Select:  FCN + 0 + RCL + RCL + RCL, etc...
 (Until one of the following prompts appears)
        Standard  AB or BA
        Inverse  (Alternate BA or AB)
        A Only
        B Only
        Home

Press STO to enter selection + CLR to exit.

-------------------------------------------------------------------------------
                               MEI CT3000
-------------------------------------------------------------------------------
                NAM Type:  EEPROM
            Manufacturer:  MEI
              Programmer:  Handset
          ESN Prefix DEC:  167
                     HEX:  A7
 ESN, S/N Match Required:  Yes
    Stamped Model Number:  CT 3000
      Number of Channels:  832

    Programming Sequence:  Power On
  Enter program sequence:  12358 + * + 0 + # + 980 + #
                           (must be inputed within 10 seconds)
                           Press 1 to enter programming mode
                           Select NAM 1 or 2
                           Enter infomation for each step then press
                            * to increment
                           Press END to write NAM infomation or select
                           NAM 2 and repeat progress to program 2nd

                       # of digits
               System ID:  5    XXXXX + *
               Local Use:  1    1 + *
              MIN Option:  1    1 + *
           Mobile Number:  10   XXX-XXX-XXXX + *
           Station Class:  2    08 + *
    Initial Page Channel:  3    333 or 334 + *
         Access Overload:  2    XX + *
        Preferred System:  1    0 (B) or 1 (A)
                Group ID:  2    XX + *
               Lock Code:  3    XXX + *
   End-to-End Signalling:  1    1 + *
        Repertory Option:  1    1 + *
              Horn Alert:  1    1 + *
               Handsfree:  1    1 + *
                Sec Code:  1    1 + *

Press END to write NAM information

              Horn Alert:  FCN + 9
         New Unlock Code:  NAM
           System Select:  FCN + 0 + RCL + RCL + RCL, etc...

(Until one of the following prompts appears)
        Standard  (AB or BA)
        Inverse  Alternate (BA or AB)
        A Only
        B Olny
        Home

Press STO to enter selection + CLR to exit.

-------------------------------------------------------------------------------
                            MEI HT5000 portable
-------------------------------------------------------------------------------
                NAM Type:  EEPROM
            Manufacturer:  MEI
              Programmer:  Keypad
          ESN Prefix DEC:  167
                     HEX:  A7
 ESN, S/N Match Required:  Yes
    Stamped Model Number:  HT 5000
      Number of Channels:  832

    Programming Sequence:  Fully charges battery on phone
                           Power On
                           Connect program adapter to bottom of phone or
                            jumper pin #1 and pin #5 while pressing PWR button
                           Enter individual parameter then press RCL to store
                            data and increment
                           SND or MUT may be pressed to scroll program parameters
                           Press END to write NAM information

                       # of digits
   System Select Feature:  1    1 + RCL
       Low Battery Alarm:  1    1 + RCL
        Memory Locations:  1    0=10 or 1=100 + RCL
          Enable Roaming:  1    1 + RCL
   End-to-End Signalling:  1    1 + RCL
              Horn Alert:  1    1 + RCL
        Repertory Option:  1    1 + RCL
           Music on Mute:  1    1 + RCL
      Enable Timer Reset:  1    1 + RCL
            Status Meter:  1    1 + RCL
                Not Used:  1    0 + RCL
        Resettable Timer:  1    0 + RCL
Restrict own Num Display:  1    0 + RCL
                Not Used:  1    0 + RCL
                Not Used:  1    0 + RCL
                Not used:  1    0 + RCL
             Lock Select:  1    0=Total lock, 1=Outgoing Lock,
                                2=Partial Lock + RCL
             Unlock Code:  1-10 XXX + RCL
         Backlight Timer:  256  10 + RCL
           Mobile Number:  10   XXX-XXX-XXXX + RCL
               System ID:  5    XXXXX + RCL
  Initial Paging Channel:  3    333 or 334 + RCL
           Station Class:  2    10 + RCL
        Preferred System:  1    1(A) or 0(B) + RCL
              MIN Option:  1    X + RCL
         Access Overload:  2    XX + RCL
                Group ID:  2    XX + RCL
               Local Use:  1    1 + RCL

The program sequence will now repeat the last 8 steps for a second NAM.
If you wish to program only one NAM, press END to exit. Once end is pressed,
wait 5 seconds, for the phone to complete the program process. After the
programming is complete, power phone OFF and remove the program adapter.

     Multiple NAM Select:  RCL + # + 6 (repeatedly until new
                           number and correct system select appears)
         New Unlock Code:  NAM
           System Select:  RCL + # + 6 + 6 + 6 + 6 etc...
(One of the following prompts will display)
        Standard (AB or BA)
        Inverted (Alternate BA or AB)
        A only
        B only
        Home

Press CLR to exit.