NEC  M3700 & M4600 (TR5E800-11C & G)

NOTES:  This is a dual NAM unit.
        The ESN prefix is 135 decimal, 87 hex.
        NEC: 1-800-421-2141

1.  This phone officially requires an NEC programing adaptor part
    number 41-2012, if you have one attach it between the data cable and the
    transceiver and power up the phone.

    If you do not have a programing adaptor one can be made from a 15 pin
    D plug and a 15 pin D socket.  Wire it straight through and jumper pins
    2 and 11.  Connect this between the tranceiver and data cable and power
    up the phone.

2.  Having powered up the phone using one of the above methods press
    RCL # 0 1 to enter test mode.

3.  (Optional) Press RCL # 3 9 to reinitialize and clear all data stored
    in both NAMs, call timers and memory locations.  Note that if this is
    done the unit will wake up in full lock mode, to unlock the unit press
    FCN # L L L L, where LLLL is the lock code of the LAST NAM programed.

4.  (Optional) Press RCL # 7 6 0 to select NAM 1, or RCL # 7 6 1 for
    NAM 2.

5.  Press RCL # 7 1 to enter programing mode.

6.  The # key stores and increments each step.

7.  Press CLR briefly to correct an entry.

8.  At any time press and hold CLR to exit programing mode then press RCL
    # 0 2 to exit test mode.

PROGRAMING DATA

STEP#    #OF DIGITS/RANGE    DESCRIPTION

01       10 DIGITS           MIN (AREA CODE & TEL#)
02       4 DIGITS            LOCK CODE
03       00000 - 32767       SYSTEM ID
04       2 DIGITS            GROUP ID (10 IN USA)
05       0333 OR 0334        INITIAL PAGING CHANNEL
06       0 OR 1              PREFERRED SYSTEM
07       2 DIGITS            ACCESS OVERLOAD CLASS
08       0 OR 1              MIN MARK
09       0 OR 1              LOCAL USE MARK

NOTE:  To toggle between NAM 1 and 2 press FCN STO 3 with phone out of
       programing mode.

LOCK: F * four digits = Partial lock, F # four digits = Full lock.  Use same
sequence to unlock.

SYSTEM SELECT: F 5 then 5 to scroll.