NEC  M4700 (TR5E800-11H)

NOTES:  This is a single NAM unit, quad NAM units are covered in file NEC07.
        The ESN prefix is 135 decimal, 87 hex.
        NEC: 1-800-421-2141


1.  This phone officially requires an NEC programing adaptor part
    number 41-2012, if you have one attach it between the data cable and the
    transceiver and power up the phone.

    If you do not have a programing adaptor one can be made from a 15 pin
    D plug and a 15 pin D socket.  Wire it straight through and jumper pins
    2 and 11.  Connect this between the tranceiver and data cable and power
    up the phone.

2.  Having powered up the phone using one of the above methods press
    RCL # 0 1 to enter test mode.

5.  Press RCL # 7 1 to enter programing mode.

6.  The # key stores and increments each step.

7.  Press CLR briefly to correct an entry.

8.  At any time press and hold CLR to exit programing mode then press RCL
    # 0 2 to exit test mode.

PROGRAMING DATA

STEP#    #OF DIGITS/RANGE    DESCRIPTION

01       10 DIGITS           MIN (AREA CODE & TEL#)
02       4 DIGITS            LOCK CODE
03       00000 - 32767       SYSTEM ID
04       2 DIGITS            GROUP ID (10 IN USA)
05       0333 OR 0334        INITIAL PAGING CHANNEL
06       0 OR 1              PREFERRED SYSTEM
07       2 DIGITS            ACCESS OVERLOAD CLASS
08       0 OR 1              MIN MARK
09       0 OR 1              LOCAL USE MARK
10       0 OR 1              RADIO MUTE
11       0 OR 1              HORN ALERT  (ONLY AVAILABLE IF STEP 10 IS
                             SET TO 0)



NOTE:  To toggle between NAM 1 and 2 press FCN STO 3 with phone out of
       programing mode.

LOCK: F * four digits = Partial lock, F # four digits = Full lock.  Use same
sequence to unlock.

SYSTEM SELECT: F 5 then 5 to scroll.