|
NOVATEL 8305A NOTES: This is a single NAM unit. The ESN prefix is 142 decimal & 8E hex Novatel: 1-800-527-2885 NAM PROGRAMING: 1. Turn power on. 2. Enter FUNCTION LOCK # 2 5 9 quickly. 3. The volume up key increments the steps (does not store). 4. The SEND key toggles single digit, A/B and SET/CLR options. 5. The SEND key stores entered data. 6. Note that data for steps 15 through 18, system id lockouts, must be preceded with a # sign. IE: #00031 SEND. 7. The END key completes and exits programing mode. PROGRAMING DATA: STEP# #OF DIGITS/RANGE DISPLAY DESCRIPTION Steps 01 and 02 are not on all models 01 CAN NOT BE CHANGED CNF REV SOFTWARE REVISION 02 CAN NOT BE CHANGED ESN HEX ESN 03 INIT REP PRESS SEND TO INITIALIZE MEM LOCATIONS AND CALL TIMERS 04 00000 - 32767 SIDH SYSTEM ID 05 10 DIGITS MIN MIN (AREA CODE & TEL NUMBER) 06 4 DIGITS LOCK CODE 1 DISPLAY ONLY 07 4 DIGITS LOCK CODE 2 DISPLAY ONLY 08 SET/CLR OPTION EX TOGGLE EXTENDED ADDRESS (SET=1, CLR=0) 09 333 OR 334 IPCH INITIAL PAGING CHANNEL 10 2 DIGITS ACCOLC ACCESS OVERLOAD CLASS 11 2 DIGITS GIM GROUP ID 12 333 ONLY IDCCA SYS A INITIAL PAGING CHANNEL 13 334 ONLY IDCCB SYS B INITIAL PAGING CHANNEL 14 1 ONLY REG TBL DATA SCAN TABLE SIZE 15 # 00000 - 32767 INVLD ID 1 SYSTEM ID LOCKOUT 16 # 00000 - 32767 INVLD ID 2 SYSTEM ID LOCKOUT 17 # 00000 - 32767 INVLD ID 3 SYSTEM ID LOCKOUT 18 # 00000 - 32767 INVLD ID 4 SYSTEM ID LOCKOUT 19 SET/CLR OPTION LU TOGGLE LOCAL USE (SET=1, CLR=0) 20 SET/CLR OPTION PS TOGGLE PREFERRED SYSTEM (SET=A, CLR=B) 21 SET/CLR OPTION IRI TOGGLE ROAM INHIBIT (SET=NO ROAM CLR=ALLOW ROAM) 22 SET/CLR OPTION SSD TOGGLE UNKNOWN OPTION 23 SET/CLR OPTION QRC TOGGLE QUICK RECALL (SET=ON, CLR=OFF) 24 SET/CLR OPTION QST TOGGLE QUICK STORE (SET=ON, CLR=OFF) 25 SET /CLR OPTION WUT TOGGLE WAKE UP TONE (SET-ON, CLR=OFF) 26 SET/CLR OPTION EE TOGGLE UNKNOWN (NORMALLY SET) 27 SET/CLR OPTION FD TOGGLE END TO END (DTMF) DIALING (SET=ON, CLR=OFF) 28 SET/CLR OPTION MFD TOGGLE EXTENDED DTMF (SET=ON, CLR=OFF) 29 SET/CLR OPTION 32D TOGGLE 32 DIGIT DIALING (SET=ON, CLR=OFF) 30 SET/CLR OPTION MLH TOGGLE MOBILE-LAND HANDOFF (SHOULD BE CLR) 31 SET/CLR OPTION LMH TOGGLE LAND-MOBILE HANDOFF (SHOULD BE CLR) 32 SET/CLR OPTION CRU TOGGLE CALL ROUND UP (SHOULD BE CLR) 33 SET/CLR OPTION NLM EUROPE ONLY (SHOULD BE CLR) 34 SET/CLR OPTION HAL TOGGLE HORN ALERT (NOT ALL PHONES) (SET=ON, CLR=OFF) 35 SET/CLR OPTION ONL TOGGLE ONLINE DIAGNOSTICS (SET=ON, CLR=OFF, IF ON THEN PHONE WILL DISPLAY CHANNEL & RSSI WHEN FCN 9 IS PRESSED) CHANGING LOCK CODE: With phone out of programing mode press MENU and scroll with volume key until display shows "old code, level 1", enter current lock code (step 11 above) phone will display "new code, LLLL". Enter the new code and press SEND. LOCK: F 1. UNLOCK: Enter four digit code. SYSTEM SELECT: UNITS WITH STANDARD HANDSET: F SND then SND to select. UNITS EQUIPPED WITH THE "COMPACT CONTROL UNIT": F 8 then 8 to select. Depending on the programing options are: PREF A, PREF B or ONLY A, ONLY B.