NOVATEL 8320

NOTES:  This is a quad NAM unit.
        The ESN prefix is 142 decimal & 8E hex
        Software revision Kn00 varies slightly to Kn01.
        Novatel: 1-800-527-2885


NAM PROGRAMING:

1.  Turn power on.

2.  Enter FUNCTION LOCK.

3.  Use the volume key to scroll to FULL LOCK (Kn01 versions).

4.  Press SND.

5.  Press # 2 5 9 to enter programing mode.

6.  The SND key is used store new data and to toggle SET/CLR options.

7.  The volume up key increments the steps.

8.  Note that data for steps 16 through 19, system id lockouts,
    must be preceded with a # sign. IE: #00031 SEND.

9.  This unit is equipped with a "Tamper Protection" option, if the phone
    displays "PASSWORD" after step 04 below then a six digit code must be
    entered to change data.  It is strongly suggested that this option NOT
    be used.

10.  The END key completes and exits programing mode.


NAM DATA:

STEP#    #OF DIGITS/RANGE    DISPLAY        DESCRIPTION

01       CAN NOT BE CHANGED  CNF REV        SOFTWARE REVISION
02       CAN NOT BE CHANGED  ESN            HEX ESN
03       0 TO 4              NAM x SEL      SELECT NAM 1-4
                                            (ENTERING 0 AT THIS STAGE
                                            WILL STEP DIRECTLY TO ENTRY
                                            26 BELOW)
04       ENABLE/DISABLE      NAM x ENABLE   TOGGLE NAM ENABLED/DISABLED

(If "PASSWORD" appears see note 10 above)

05       10 DIGITS           MIN            MIN (AREA CODE & TEL NUMBER)
06       00000 - 32767       SIDH           SYSTEM ID
07       TOGGLE              TP OFF OR END

You may press END at this stage to return to NAM select, step 03, then
press "0" to go directly to step 26 below.  Steps 09 through 25 are
set automatically.  Press volume down if you wish to review or change steps
09 through 25.  It is suggested that you do not press SND which will display
the following:

08       6 DIGITS            TP CODE        ENTER 6 DIGIT PASSWORD
                                            (PRESS SND TO STORE)
                             AGAIN          RE ENTER PASSWORD TO CONFIRM

09       SET/CLR             OPTION EX      TOGGLE EXTENDED ADDRESS
                                            (SET=1, CLR=0)
10       0333 ONLY           IDCCA          SYS A INITIAL PAGING CHANNEL
11       0334 ONLY           IDCCB          SYS B INITIAL PAGING CHANNEL
12       2 DIGITS            ACCOLC         ACCESS OVERLOAD CLASS
13       2 DIGITS            GIM            GROUP ID
14       1 ONLY              REG TBL        DATA SCAN TABLE SIZE
15       SET/CLR             OPTION LU      TOGGLE LOCAL USE
                                            (SET=1, CLR=0)
16       # 00000 - 32767     INVLD ID 1     SYSTEM ID LOCKOUT
17       # 00000 - 32767     INVLD ID 2     SYSTEM ID LOCKOUT
18       # 00000 - 32767     INVLD ID 3     SYSTEM ID LOCKOUT
19       # 00000 - 32767     INVLD ID 4     SYSTEM ID LOCKOUT
20       SET/CLR             OPTION FD      TOGGLE END TO END (DTMF) DIALING
                                            (SET=ON, CLR=OFF)
21       SET/CLR             OPTION RFD     TOGGLE EXTENDED DTMF
                                            (SET=ON, CLR=OFF)
22       SET/CLR             OPTION 32D     TOGGLE 32 DIGIT DIALING
                                            (SET=ON, CLR=OFF)
23       SET/CLR             OPTION PS      TOGGLE PREFERRED SYSTEM
                                            (SET=A, CLR=B)
24       SET/CLR             OPTION IRI     TOGGLE ROAM INHIBIT
                                            (SET=NO ROAM, CLR=ALLOW ROAM)
25       SET/CLR             OPTION SSD     TOGGLE SIGNAL STRENGTH DISP
                                            (SET=ON, CLR=OFF)

26       SND/VOL             INIT REP       PRESS SND TO INITIALIZE
                                            MEMORY LOCATIONS
27       4 DIGITS            LOCKCODE       LOCK CODE (Kn00 VERSION HAS
                                            LOCK 1 & LOCK 2)
28       SET/CLR             OPTION QRC     TOGGLE QUICK RECALL
                                            (SET=ON, CLR=OFF)
29       SET/CLR             OPTION QST     TOGGLE QUICK STORE
                                            (SET=ON, CLR=OFF)
30       SET /CLR            OPTION WUT     TOGGLE WAKE UP TONE
                                            (SET-ON, CLR=OFF)
31       SET/CLR             OPTION MLH     TOGGLE MOBILE-LAND HANDOFF
                                            (SHOULD BE CLR)
32       SET/CLR             OPTION LMH     TOGGLE LAND-MOBILE HANDOFF
                                            (SHOULD BE CLR)
33       SET/CLR             OPTION CRU     TOGGLE CALL ROUND UP
                                            (SHOULD BE CLR)
34       SET/CLR             OPTION EE      TOGGLE END TO END (DTMF) DIALING
                                            (SET=ON, CLR=OFF)
35       SET/CLR             OPTION NLM     EUROPE ONLY
                                            (SHOULD BE CLR)
36       SET/CLR             OPTION HAL     TOGGLE HORN ALERT (NOT ALL PHONES)
                                            (SET=ON, CLR=OFF)
37       SET/CLR             OPTION ONL     TOGGLE ONLINE DIAGNOSTICS
                                            (SET=ON, CLR=OFF)

LOCK: F 1.  UNLOCK: Enter four digit code.

SYSTEM SELECT:

UNITS WITH STANDARD HANDSET: F SND then SND to select.
UNITS EQUIPPED WITH THE "COMPACT CONTROL UNIT": F 8 then 8 to select.
Depending on the programing options are: PREF A, PREF B or ONLY A, ONLY B.