PANASONIC EB 300, EZ542, EZ952 SERIES, EF6106EA AND EF6110EA.

NOTES:  This is a single NAM mobile or transportable unit.
        The ESN prefix is 136 decimal & 88 hex.
        Panasonic: 201-392-6053


NAM PROGRAMING:

1.  This unit requires a programing adaptor, if you do not have one try
    one of the following:

    Jumper pins 3 and 25 of a standard power cable.

    If the phone has a transportable pack you can wire a 25 pin "D" socket
    to a 25 pin "D" plug, wire it straight through and jump pins 3 and 25.
    Connect this between the tranceiver and transportable pack.  A ribbon
    cable with crimp on "D" connectors makes a convienient adaptor.

2.  Turn power on with pins 3 and 25 jumpered.

3.  Enter * 0 0 0 0 #, the "In Use" lamp will light briefly then the phone
    will display "0", you are now in maintenance mode.

4.  Enter * 1 SND, the "In Use" lamp will light briefly then the phone will
    display "1".

5.  Enter 5 0 SND, the "In Use" lamp will light briefly and the display
    will clear.  You are now in programing mode.

6.  Each data entry can be looked at by pressing RCL followed by the
    location (step) number below.

7.  To store new data enter the value, press STO followed by the location
    (step) number below.  For example to enter a system ID of 00031 enter
    00031 STO 01.  Data can be entered or reviewed in any order.

8.  At any time press STO * * to complete programing and return to
    maintenance mode.

9.  Press END to exit maintenance mode, or turn the power off.


PROGRAMING DATA:

STEP#    #OF DIGITS/RANGE    DESCRIPTION

01       00000 - 32767       SYSTEM ID
02       10 DIGITS           MIN (AREA CODE & TEL NUMBER)
03       3 OR 4 DIGITS       LOCK CODE
04       UP TO 12 DIGITS     SPEED DIAL NUMBER (PERMANENT NUMBER STORED IN
                             LOCATION 00)
05       00 OR 08            STATION CLASS MARK
06       333 OR 334          INITIAL PAGING CHANNEL
07       2 DIGITS            ACCESS OVERLOAD CLASS
08       2 DIGITS            GROUP ID (10 IN USA)
09       8 DIGIT, 0 OR 1     SEE NOTE 1 BELOW.
10       8 DIGIT, 0 OR 1     SEE NOTE 2 BELOW
11       8 DIGIT, 0 OR 1     SEE NOTE 3 BELOW
12       2 DIGIT             DIALED DIGIT LIMIT, 00=16, 01=15, 02=14 ETC.


NOTES:

1.  Suggested entry is: 11111100 for "A" system, 11011100 for "B" system.

Digit 1 = Local use Mark
Digit 2 = MIN Mark
Digit 3 = Preferred System
Digit 4 = End To End (DTMF) Dialing.
Digit 5 = Repertory (speed) Dialing.
Digit 6 = Horn Alert
Digit 7 = Not Used
Digit 8 = Not Used

2.  Suggested entry is: 00000100.

Digit 1 = Not Used
Digit 2 = Built in Monitor
Digit 3 = Auto Lock
Digit 4 = Not Used
Digit 5 = Not Used
(Enable only one of the following)
Digit 6 = Allow user A/B select
Digit 7 = Preferred system only
Digit 8 = Home system only (no Roam)

3.  Suggested entry is: 11000011.

Digit 1 = Received call indicator (call in absence)
Digit 2 = Continuous DTMF
Digit 3 = Not Used
Digit 4 = Not Used
Digit 5 = Not Used
Digit 6 = Not Used
Digit 7 = Enable total timer
Digit 8 = Enable individual call timer


LOCK: F LOCK.  UNLOCK: Enter three of four digit code.

A/B SYSTEM SELECT:

1.  Pref/Non-Pref: F #, (phone will default to preferred/non-preferred on
                        every power up)
2.  A only: F 9

3.  B only: F 8

4.  Home only: F 7