|
CT-100 (170-3001) NAM Programming Instructions STEP 1 (Enter Program Mode): Type: *17*3001*LOCK* (The factory LOCK code is 1234) STEP 2 (Programming the Primary NAM information): The phone will now inform you of the parameter it wants you to enter on the top line with the previously programmed parameter (or factory default) on second line. The starred (*) lines require information that MUST be supplied by the cellular carrier. *Line 1 of Phone: HO-Id Type: 5-digit Home System ID then Line 1 of Phone: ACCESS Type: 1 then Line 1 of Phone: LOCAL Type: 1 then *Line 1 of Phone: Phone n Type: 10-digit phone number then Line 1 of Phone: CLASS Type: 0 0 then *Line 1 of Phone: PAGE ch Type: 3-digit Paging Channel then (Note: Channel A is: 333, Channel B is: 334) Line 1 of Phone: O-Load Type: 0 and last digit of phone # then *Line 1 of Phone: Group Type: 2-digit Group ID then Line 1 of Phone: SEC Type: 4-digit LOCK Code then The phone will return to the normal power-on mode. The phone should now be correctly programmed. It is important to remember that it will take a cellular carrier several hours to activate a cellular phone number. Settings List: 1 Display Carrier Priority 11 Change Carrier Priority (A/B) 2 Enable/Disable Horn Alert 3 Display Time of Last Call 33 Display Call Timer Total 44 Enable/Disable Key Entry Tone 5 Auto Shutoff + High Power - Low Power *LOCK* Reset Timer