TUCoPS :: Phreaking Cellular - Other Manufacturers :: radios~4.txt

Radio Shack CT-105 NAM Programming


CT-105/1050/1055 (170-1079/1021/1007) NAM Programming

 To Enter Program Mode Type:

  # 000000 ## 953739 #   49

Phone Responds:   Memory 49 Stored

Press  to turn the phone off, then on again.

   Phone Responds:   WHICH NAM?

Press 1 then  to select the first NAM.
*Line 1 of Phone: SYST.ID       Type:  5-digit Home System ID then
 Line 1 of Phone: No.           Type:  10-digit Cellular Phone #
*Line 1 of Phone: GROUP ID      Type:  2-digit carrier Group ID then

Phone Responds:   SAVE NAM?            Press  1   to save the
                                       programming, which will fill in the
                                       remaining options and exit. Press
                                        to modify the remaining
                                       parameters.

 Line 1 of Phone: OPR. NO       Type:  Normally *611 then
 Line 1 of Phone: NUM           Type:  Optional # that will be displayed on
                                       power up, then
 Line 1 of Phone: NAM ID        Type:  Optional abbreviation for carrier
                                       city, then
 Line 1 of Phone: EMERGENCY NO  Type:  Normally 911 then
 Line 1 of Phone: INTERNAT CODE Type:  Normally 011 then
 Line 1 of Phone: O/LOAD CLASS  Type:  Normally 0 and last digit of phone #,
                                       then
 Line 1 of Phone: EXP           Type:  1 then
 Line 1 of Phone: IPCH          Type:  Initial Paging Channel: 0333 if
                                       paging chan A, or 0334 if paging
                                       chan B, then .
 Line 1 of Phone: PREF ICC      Type:  Preferred Paging Channel: 0333 if
                                       paging chan A, or 0334 if paging
                                       chan B, then .
 Line 1 of Phone: NON-PREF ICC  Type:  Non-Pref Paging Channel, should be
                                       opposite PREF ICC

Phone Responds:   SAVE NAM?            Press  1  to save the
                                       programming.

Settings List: ( to select options, then press  to save)

MENU A:                              MENU B:
 0    Phone Lock                 0    Horn Alert
 1    Go to menu B               1    Go To Menu C
 2    Alpha (Name) Search        2    Backlight Timer
 3    Display/Select Phone #     3    Message Language
 4    System Type                4    Datalink Select
 5    Last call Timer            5    Touch Tone Options
 6    Timed AutoRedial           6    Battery Saver
 7    Alarm Timer
 8    Key Entry Volume
 9    Ringing Volume

MENU C:
   (Security Code) 0      Display Own Serial Number (ESN)
   (Security Code) 1    **Memory Calls (1-20) Only
   (Security Code) 2      Change Security Code
   (Security Code) 3      Erase All Memory
   (Security Code) 4    **Memory Lock
   (Security Code) 5      Display/Reset Airtime Meter
   (Security Code) 6      Service Mode

Notes: These are the most likely to cause programming/use errors.
       Security and Pin codes are the same (factory default 0000).

TUCoPS is optimized to look best in Firefox® on a widescreen monitor (1440x900 or better).
Site design & layout copyright © 1986-2024 AOH