CT-351 (170-1061) Dual-NAM Programming Instructions

STEP 1 to Enter Progam Mode:

Type:   *3001#1234500    Phone Responds:  STORE NOT DONE

STEP 2 to Program the User's Phone Number:

Press: [RCL] 0 2   Phone Responds:  1111111111 (or previously programmed #)
Press and HOLD:  [CLR] until display is empty

Type: cellular phone number and [STO] 02  Phone Responds: REPLACE CONTENTS?

For example:   8173905555 [STO] 02

Press:  [STO]      Phone Responds:   STORED

STEP 3 to Enter Carrier Parameters:

Type:  [RCL] 0 3   Phone Responds:  38*1*1*334*15*15 (or previously
                                                     programmed parameters)
Press and HOLD:  [CLR] until display is empty

Type: cellular phone paramemters and  03, on the CT-352,
      add the Long Distance and International Code.

For the CT-350/351: 00038*1*1*334*05*10 [STO] 03
                      ³        ³   ³  ³
Home or System ÄÄÄÄÄÄÄÙ  333 for A ³  ÀÄÄÄ-Group ID
                         334 for B ³
                         Channel   ³
                                   ÀÄ-0 and Last
                                      Digit of Phone #

For the CT-352:  00038*1*1*334*05*10#0111*1 [STO] 03
                   ³        ³   ³  ³    ³
Home or System ÄÄÄÄÙ  333 for A ³  ³    ÀÄÄÄÄÄÄÄInternat Code
                      334 for B ³  ÀÄÄÄÄ-Group ID
                      Channel   ³
                                ÀÄ-0 and Last
                                   Digit of Phone #

Phone Responds:   REPLACE CONTENTS?              Press:  [STO]

STEP 4 to Enter Lock/Security Code Parameters

Type:  [RCL] 01              Phone May Respond:  911#*911#0*1234
Press and HOLD:  [CLR] until display is empty

Type:  911#*911#0*

Type (for the CT-350):      4 digit lock code       (1234 is the default)
Type (for the CT-351/352):  5 digit security code   (12345 is the default)

Note: The 0 in this section denotes "ENGLISH" language selection. Replace
      with a "1" for Spanish, a "2" for French.

Type:  [STO] 01      Phone Responds:  REPLACE CONTENTS?     Press:  [STO]

You are DONE.  The phone must be turned off and then on again before
it will recognize the new parameters.

Settings List:

      0    Lock Phone

     [MENU] 1    Change Carrier Priority (A/B)
     [MENU] 2    Display Last # Dialed
     [MENU] 3    Call Timers
     [MENU] 4    Turn ON/OFF Display Light
     [MENU] 5    Enable/Disable Key Tone
     [MENU] 6    Ring Volume
     [MENU] 7    Primary/Secondary NAM select
     [MENU] 8    Send DTMF Tones