PROGRAMMING INSTRUCTIONS

STEP 1 to Enter Program Mode:

    Type:   *3001#12345<STO>00    Phone Responds:  STORE NOT DONE

STEP 2 to Program the User's Phone Number:

    Press: <RCL> 0 2   Phone Responds:  1111111111 (or previously
                       programmed #)
    Press and HOLD:  <CLR> until display is empty

    Type: cellular phone number and <STO> 02  Phone Responds: REPLACE
          CONTENTS?

    For example:   8173905555 <STO> 02

    Press:  <STO>      Phone Responds:   STORED

STEP 3 to Enter Carrier Parameters:

    Type:  <RCL> 0 3   Phone Responds:  38*1*1*334*15*15 (or previously 
                                                  programmed parameters)
    Press and HOLD:  <CLR> until display is empty

    Type: cellular phone parameters and <STO> 03, on the CT-352,
          add the Long Distance and International Code.

        For the CT-353: 00038*1*1*334*05*10 <STO> 03
                          ³        ³   ³  ³
    Home or System ÄÄÄÄÄÄÄÙ  333 for A ³  ÀÄÄÄ-Group ID
                             334 for B ³
                             Channel   ³
                                       ÀÄ-0 and Last
                                          Digit of Phone #

    For the CT-352:  00038*1*1*334*05*10#0111*1 <STO> 03
                       ³        ³   ³  ³    ³  
    Home or System ÄÄÄÄÙ  333 for A ³  ³    ÀÄÄÄÄÄÄÄInternet Code
                          334 for B ³  ÀÄÄÄÄ-Group ID
                          Channel   ³
                                    ÀÄ-0 and Last
                                       Digit of Phone #

    Phone Responds:   REPLACE CONTENTS?              Press:  <STO>

STEP 4 to Enter Lock/Security Code Parameters

    Type:  <RCL>01              Phone May Respond:  911#*911#0*1234
    Press and HOLD:  <CLR> until display is empty

    Type:  911#*911#0*

    Type (for the CT-350):      4 digit lock code       (1234 is the
                                                         default)
    Type (for the CT-351/352):  5 digit security code   (12345 is the
                                                         default)

    NOTE:  The 0 in this section denotes "ENGLISH" language selection.
           Replace with a "1" for Spanish, a "2" for French.

    Type:  <STO>01      Phone Responds:  REPLACE CONTENTS?     Press: <STO>

You are DONE.  The phone must be turned off and then on again before it
will recognize the new parameters.  Always wait at least two hours after
receiving the cellular phone number from the carrier before testing the
phone.

Settings List:

<MENU> 0    Lock Phone
<MENU> 1    Change Carrier Priority (A/B)
<MENU> 2    Display Last # Dialed
<MENU> 3    Call Timers
<MENU> 4    Turn ON/OFF Display Light
<MENU> 5    Enable/Disable Key Tone
<MENU> 6    Ring Volume
<MENU> 7    Primary/Secondary NAM select
<MENU> 8    Send DTMF Tones