TUCoPS :: Phreaking Cellular - Other Manufacturers :: rshack05.txt

Radio Shack 17-3001/1075, CT100/101 Programming

RADIO SHACK 17-3001/1075, CT100/101

NOTES:  This is a single NAM unit.
        The ESN prefix is 165 decimal & A5 hex.
        Radio Shack: 817-390-3234


NAM PROGRAMING:

1.  Turn power on.

2.  Enter * 1 7 * 3 0 0 1 * L L L L *, where LLLL is the lock code, the
    factory default is 1234.  If the lock code is not known and can't be
    guessed the phone can not be programed without a Nokia service handset.

3.  Press SEL to store data and scroll between parameter names and values.

4.  Press CLR to correct an entry.

5.  Press END to abort programing.

6.  At any time press SEL END to exit and complete programing, the phone
    will also automatically exit if you scroll through all parameters.


PROGRAMING DATA

STEP#    #OF DIGITS/RANGE    DISPLAY        DESCRIPTION

01       00000 - 32767       HO-Id          SYSTEM ID
02       0 OR 1              ACCESS         ACCESS METOD (MIN MARK)
03       0 OR 1              LOCAL          LOCAL USE MARK
04       10 DIGITS           Phone N        MIN (AREA CODE & TEL#)
05       08 ONLY             CLASS          STATION CLASS MARK
06       333 OR 334          PAGE ch        INITIAL PAGING CHANNEL
07       2 DIGITS            O-LOAd         ACCESS OVERLOAD CLASS
08       2 DIGITS            GrouP          GROUP ID (10 IN USA)
09       4 DIGITS            Loc CodE       LOCK CODE

NOTE: It is suggested that the lock code be either left at 1234, or
      the last four digits of the phone number.

LOCK: SEL LOCK, UNLOCK: FOUR DIGIT LOCK CODE

SYSTEM SELECT: SEL 1, THEN 1 UNTIL DESIRED OPTION IS DISPLAYED

 A = A ONLY
 B = B ONLY
 S = PREF/NON PREF 

TUCoPS is optimized to look best in Firefox® on a widescreen monitor (1440x900 or better).
Site design & layout copyright © 1986-2024 AOH